Leak test methods & Testing Equipment | HeMaTech& Prüfgeräte

General What is a leak test method? In metal and plastics processing industry you will find very often the requirement for a quality control with regards to the tightness of parts produced. Diverse leak test methods and leak test instruments are used.Hollow parts of any kind (valves, pipes, cylinder heads etc.) which have to guarantee a media separation (air, water, oil etc.) have to be checked for a potentially existing leakage.With regards to the various applications a number of leak testing methods have been developed over the years. It ranges from a dip tank filled with water to mass spectrometry to detect leakage rates in the order of 10-6 cm³/min of gas. The decision which method to use depends on the design of the part under test, the acceptable leakage, the required accuracy as well as the rapidness and the economic viability of the test device. Contact We are pleased to answer your questions:Tel.: +49 (0) 71 95-13 69 0eMail: Verkauf@HeMaTech.de Fundamentals Fundamentals of lea...